| |
 |
 |
 |
 |
<<< PLEASE SELECT A BRAND |
|
| |
|
|
|
|
|
|
| |
Line of Site Remote Controls |
|
|
|
| |
|
|
Proportional:
The items listed below as proportional are operated by the
Transmitters joysticks. The joysticks allow the machines
functions to be proportionally operated.
• Steering/Declutch - Left/Right
• Throttle - Forward/Reverse
• Blade - Raise, Lower tilt LHS, tilt RHS, Pitch out,
Pitch in (if Pitch lifted)
• Ripper - Raised, Lower In, Out
|
|
|
|
| |
|
|
Non-Proportional:
The item's listed below a non proportional are operated
by the Transmitters switches and some joystick positions.
The switches allow the machine functions to be turned
on and off as required. The joysticks cause the machine
functions to be selected as required.
• Engine - Start/Stop EUI energised to run
engine)
• Lights - Front/Rear
• Brake - Park Brake, Service Brake
• Gears - Forward 1st gear Reverse 1st and 2nd
• Decelerator
• Hom
• AFFF Fire extinguisher activation (if AFFF system
fitted). When a machine fire situation occurs the
onboard fire extinguisher (AFFF) system can be
activated by the remote control Transmitter. When the
Transmitters fire switch is operated the system causes
the onboard AFFF system to discharge and the engine
is automatically shut down.
• Pre start alann. When the machine is started on
remote control, the machines horn will sound for
3 seconds before the starter motor will crank the
engine. |
|
|
|
| |
Dozer Remote Control System |
|
|
|
| |
|
|
Feed BackMonitoringFunctions:
• Engine monitoring - level 2, level 3 wamings.
When the level 2 and/or level 3 monitoring alarm
operates in the machine this also registers a fault at
the Transmitter. The Transmitter's alert LED's will flash
and the operator is able to read the fault (check engine
or stop engine) on the Transmitter's display.
Safety Isolators:
• Remote/manual dash mounted switch, allows
the operator to select between remote or manual
operation whilst In the cabin
• Starter motor isolator is used to safely perform
maintenance tasks. This isolator allows work to
be performed on the machine with the battery power
on and protects personnel from the engine being
accidentally cranked and started. |
|
|
|
| |
|
|
Advantages:
•Prevents repetitive stress injuries.
• Maximises machine utilisation
• Greater overall operator vision
• Improved ergonomic working environment for the
operator
• Less idle time between production cycles
• Reduce the risk ofslip injuries getting on/off machine
• More control ofcritical machine tolerances
• Hazardous machine tasks can be completed safely |
|
|
|
| |
|
|
Dozer Applications:
• Caterpillar D5N, D8T, D9H, D10, D10N, D1OR (series
1&2), D11N, D11 RSeries (1,2,3)
• Komastu D475, 575A, D575A-3 & D275AX |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
back to top |
|
